Factory Price High Performance Mppt Solar Pump Inverter Vfd 1.5kw–500kw

Short Description:

A complete solar pump system consist of solar array, pump and solar pump inverter. The inverter can convert DC power from solar PV array to AC power to run pump motors.

Solar array, an aggregation of many solar modules connected in series and parallel, absorbs sunlight radiation and converts it into electrical energy, providing dynamical water for the whole system.

Solar water pump inverter controls the system operation and adjust the output frequency in real-time according to the variation of sunlight intensity to realize the maximum power point tracking (MPPT).

Pump, drive by 3-phase or single phase AC motor, can draw water from the deep wells or rivers and lakes to pour into the storage tank or reservoir, or directly connect to the irrigation system, fountain system, etc.

Send email to us

Product Detail

Product Tags

Features

Solar water pump inverter known as solar vfd is used to control the operation of solar water pump system. It allows you to adjust output frequency as per intensity of the sunlight to achieve the maximum power point tracking(mppt). It is an off-grid type inverter. The solar water pump inverter does not depend on the power grid. It works with a water level control system. Solar water pump inverter can help save ample energy, with improve control, and require less maintenance due to nearly no wear and tear, offering reliable protection to the motor, and reducing stress on valves, pipework and other related systems.

With the maximum power point tracking, you get the best output power possible from solar panel, which increases the performance of the pump while auto start/stop can save your investment.

1.Apply to all kinds of single phase and 3 phase AC induction motor.
2.Equipped with TI DSP digital control technique and Infineon IGBT power integration module design.
3.Maximum power point tracking(MPPT) algorithm for dynamic VI.MPPT efficiency can be 99%.
4.Fast response speed and good stability.
5.AC and DC input available, but do not use DC and AC at the same time.
6.Remote control, support RS485 protocol.

7.Automatic sleep&awake function:
1) auto sleep and awake according to the high and low water level in the tank respectively.
2) auto sleep and awake according to the weak and strong sunlight respectively.
8. Full protections:Overload, over-current, over-voltage,under-voltage, short circuit, dry pumping, PV reversed connection protection.
9. Widely used in agriculture and forestry irrigation, desert control, solar pasture irrigation, grassland animal husbandry, urban water supply and other landscapes.

Specification

NK112-2S-0.7G~4.0G	Input specification	Maximum Input PV Voltage(PV Open-Circuit Voltage)	450VDC
		Recommended MPPT Voltage Range	320~370VDC(Vmp)
		Recommended Input Operation Voltage	388~450VDC(VOC)
	Input specification (Grid or backup generator input)	Input voltage	1PH 220V(-15%～30%)
	Output specification	Rated output voltage	1PH 220V
	Output specification	Output frequency	0～600.00Hzdefault:（0～60.00Hz）
	Fault protection	Built-in Protection	Protection of light load, over-current, over-voltage, output phase-lose, under-load, under-voltage, short circuit, overheating, water pump run dry etc.
NK112-2T-0.7G~5.5G	Input specification	Maximum Input PV Voltage(PV Open-Circuit Voltage)	450VDC
		Recommended MPPT Voltage Range	320~370VDC(Vmp)
		Recommended Input Operation Voltage	388~450VDC(VOC)
	Input specification (Grid or backup generator input)	Input voltage	1PH 220V(-15%～30%)
	Output specification	Rated output voltage	3PH 220V
	Output specification	Output frequency	0～600.00Hzdefault:（0～60.00Hz）
	Fault protection	Built-in Protection	Protection of light load, over-current, over-voltage, output phase-lose, under-load, under-voltage, short circuit, overheating, water pump run dry etc.
NK112-4T-0.7G~132G	Input specification	Maximum Input PV Voltage(PV Open-Circuit Voltage)	780VDC
		Recommended MPPT Voltage Range	540~630VDC(Vmp)
		Recommended Input Operation Voltage	670~780VDC(VOC)
	Input specification (Grid or backup generator input)	Input voltage	3PH 380V(-15%～30%)
	Output specification	Rated output voltage	3PH 380V
	Output specification	Output frequency	0～600.00Hzdefault:（0～60.00Hz）
	Fault protection	Built-in Protection	Protection of light load, over-current, over-voltage, output phase-lose, under-load, under-voltage, short circuit, overheating, water pump run dry etc.
Keypad display	LED display	Highlight LED digital tube display the inverter information
Keypad display	LCD display	LCD display inverter information
Others	Application Site	No direct sunshine, no dust, corrosive gas, combustible gas, oil mist, steam, dripping or salinity etc.
	Altitude	0～2000m, Derated use above 1000m, per 100m,the rated output current decrease 1%.
	EnvironmentTemperature	-10℃～50℃(Environment Temperature be 40℃～50℃, please keep derated use.)
	Humidity	5～95%,non-condensation
	Vibration	Less than 5.9m/s2（0.6g）
	Storage Temperature	-20℃～+70℃
	Efficiency	Rated Power Run≥93%
	Installation	Wall or rail mounting
	Cooling	Forced Air Cooling

Model

Model	Rated power	DC input VOC Voltage	Recommend VOC Voltage	Recommend MPPT Voltage	Max DC Input Current	Rated Output Current	Rated Output Voltage	Output Frequency
Model	kW	V	V	V	A	A	V	Hz
NK112-2S-0.7G	0.75	300--450	388--450	320--370	8.5	5.5	1PH 220	0-50/60
NK112-2S-1.5G	1.5	300--450	388--450	320--370	14	10	1PH 220	0-50/60
NK112-2S-2.2G	2.2	300--450	388--450	320--370	23	13.8	1PH 220	0-50/60
NK112-2S-4.0G	4	300--450	388--450	320--370	35	20	1PH 220	0-50/60
NK112-2T-0.7G	0.75	200--450	388--450	320--370	8.5	4.5	3PH 220	0-50/60
NK112-2T-1.5G	1.5	200--450	388--450	320--370	14	7	3PH 220	0-50/60
NK112-2T-2.2G	2.2	200--450	388--450	320--370	23	10	3PH 220	0-50/60
NK112-2T-4.0G	4	200--450	388--450	320--370	35	16	3PH 220	0-50/60
NK112-2T-5.5G	5.5	200--450	388--450	320--370	50	20	3PH 220	0-50/60
NK112-4T-0.7G	0.75	300--780	670--780	540--630	8.5	2.5	3PH380	0-50/60
NK112-4T-1.5G	1.5	300--780	670--780	540--630	8.5	3.7	3PH380	0-50/60
NK112-4T-2.2G	2.2	300--780	670--780	540--630	14	5.3	3PH380	0-50/60
NK112-4T-4.0G	4	300--780	670--780	540--630	23	9.5	3PH380	0-50/60
NK112-4T-5.5G	5.5	300--780	670--780	540--630	23	14	3PH380	0-50/60
NK112-4T-7.5G	7.5	300--780	670--780	540--630	35	18.5	3PH380	0-50/60
NK112-4T-11G	11	300--780	670--780	540--630	35	25	3PH380	0-50/60
NK112-4T-15G	15	300--780	670--780	540--630	50	32	3PH380	0-50/60
NK112-4T-18.5G	18.5	300--780	670--780	540--630	50	38	3PH380	0-50/60
NK112-4T-22G	22	300--780	670--780	540--630	75	45	3PH380	0-50/60
NK112-4T-30G	30	300--780	670--780	540--630	75	60	3PH380	0-50/60
NK112-4T-37G	37	300--780	670--780	540--630	100	75	3PH380	0-50/60
NK112-4T-45G	45	300--780	670--780	540--630	100	92	3PH380	0-50/60
NK112-4T-55G	55	300--780	670--780	540--630	150	115	3PH380	0-50/60
NK112-4T-75G	75	300--780	670--780	540--630	225	150	3PH380	0-50/60
NK112-4T-90G	90	300--780	670--780	540--630	300	180	3PH380	0-50/60
NK112-4T-110G	110	300--780	670--780	540--630	375	215	3PH380	0-50/60
NK112-4T-132G	132	300--780	670--780	540--630	450	260	3PH380	0-50/60

Application

Due to the inexhaustiable solar energy that can be obtained everywhere, the solar water pump system automatically works at sunrise, rests at sunset. It is an ideal green energy water extraction system integrating economy, reliability and enviromental protection benefits. Solar water pump inverters are widely used in agricultural irrigation, desert control, grassland animal husbandry, urban water features, domestic water, etc.,

Customer service

1. ODM/OEM service is offered.

2. Quick order confirmation.

3. Fast delivery time.

4. Convenient payment term.

At present, the company is vigorously expanding overseas markets and global layout. We are committed to becoming one of the top ten export enterprises in China’s electrical automatic product, serving the world with high-quality products and achieving a win-win situation with more customers.