1 Phase 2 Wire 120V 220V Mini 3kvar 6.6kvar 11kvar Statcom Static Var Generator

Short Description:

120v 220v single phase static var generator, operates on the base of a three -level topology circuit, provide power quality solutions such as stepless power factor correction, eliminate harmonic and load balance. The capacity of SVG modular from 5kVar to 20kVar, and allows 20 modules to connect parallel, and users can easily get the target filter current capacity.

Mini static var generator could eliminate the harmonic current of nonlinear load
Improve the operating efficiency of the power system and reduce the downtime of the power distribution system, especially for low-voltage systems with frequent load upgrades
Meet the strict requirements of Utilities for electrical energy quality, avoid fines and power supply interruptions caused by electrical quality problems, and reduce carbon dioxide emissions


Product Detail

Product Tags

Video

Features

120v 220v Mini SVGBased on our mature IGBT development platform. Therefore, it will be a perfect solution with applications having reactive power requirements along with unbalanced loads, which is the case with the electricity distribution in rural areas,some industrial applications and much more.

1. The rate factor value can reach >0.99, and will not cause over-compensation and under-compensation;
2. Ultra-fast dynamic compensation, full response time less than 10ms;
3. Active compensation device to avoid resonance;

4. Can be combined with capacitors to form a hybrid compensation scheme;
5. Active power compensation equipment;

Specification

Wiring configuration                       Single Phase(1P2W)
Network voltage(V)                               120                  220
Network voltage range                        -20%--+20%
Network frequency(Hz)

50/60(-10%--+10%)

Parallel quantity

Unlimited

Individual module capacity(kvar)

1.8, 3.6, 6, 9,12,18

 3, 6, 10, 16, 22,30
Overall efficiency

>97%

Harmonic filtering capability                                                    2nd to 13th Harmonic Order
CT mounting method

Closed or open loop(Open loop is recommended in parallel operation)

Response time

<10ms

Overload capacity

110%Continuous operation, 120%-1min

Circuit topology

Three-level topology

Switching frequency(khz)

20kHz

Protective function

Parallel between modules 

Redundancy Over 20 kinds of protections such as over-voltage, under-voltage, overheating, over-current, short circuit, etc.
Display

4.3 inch screen

Communication port

RS485,Ethernet Port, 4G, WiFI(Optional)

Communication protocal

Modbus、TCP/IP

Error alarm  Yes, up to 500 alarm messages can be recorded
Monitoring  Support independent monitoring of each module / centralized monitoring of the whole machine
Noise level

<60dB 

Mounting type                                             Wall-mounted, rack-mounted, cabinet
Altitude

Derating usage>1500m

Temperature

Operating temperature: -45℃--55℃,  derating usage above 55℃

Storage temperature: -45℃--70℃

Humidity

5%--95%RH, non-condensing

Protection class

IP42

Application

UPQC61

Statcom svg can be widely used in power system, electroplating, water treatment equipment, petrochemical enterprises, large shopping malls and office buildings, precision electronics enterprises, airport/port power supply system, medical institutions and so on. According to the different application objects, the application of static var  generator will play a role in ensuring the reliability of power supply, reducing interference, improving product quality, extending equipment life, reducing equipment damage and so on.

Statcom static var generator mostly used as below: Fast inductive and capacitive reactive power compensation, and can balance three-phase loads and eliminate harmonics

• Data Center and UPS system
• New energy power generation, e.g. PV and wind power
• Precision equipment manufacturing, e.g. single crystal silicon, semiconductor
• Industrial production machine
• Electrical welding system
• Plastic industrial machinery, e.g. extrusion machines, injection molding machines, etc.
• Office building and shopping mall

Customer service

1. ODM/OEM service is offered.

2. Quick order confirmation.

3. Fast delivery time.

4. Convenient payment term.

At present, the company is vigorously expanding overseas markets and global layout. We are committed to becoming one of the top ten export enterprises in China’s electrical automatic product, serving the world with high-quality products and achieving a win-win situation with more customers.

Noker SERVICE
Freight

  • Previous:
  • Next: